Special industrial liquids


Industrial lubricants and friction modifiers must meet various requirements. Therefore, there are several types of lubricants with different properties. The viscosity of oils and the consistency of plastic lubricants comply with the conditions and methods of application on specific treated surfaces.

Zobrazit více
Special industrial liquids

Assembly and disassembly

Certain connected parts (such as screw joints, lever mechanisms, pins, articulated joints in construction machinery and all types of laying with some clearance or overlap) may be difficult to disassemble after a certain time of usage, vibrations, high temperatures, loading and other aggressive factors of the environment.

The lubricants make the disassembly of joints easier, even after several years; it is reasonable to prevent complications by using suitable lubricants during the assembly.

More info here

PasteLub® 10/12

Suitable against metal-based blocking Effective in temperatures from -180 to 1,300 °C It is possible to disassemble treated parts even after many years of exposure to high temperatures, loads and aggressive environmental factors …

PasteLub® 10/12

CeramLub ceramic paste

Temperature resistance from -20 to 1,600 °C Resistant to salt water, acids and alkalis Repelling water, protecting against corrosion, not getting rubbery Resistant to vibration corrosion Preventing jamming and pasting …

CeramLub ceramic paste

BSS®-UNI universal service spray

Suitable for quick use Applicable at -20 to 80 °C Temperature resistance up to 1,300 °C

BSS®-UNI universal service spray

Gears

Gears used in industry require special lubricants which provide excellent performance even under extreme conditions. For example, drives of drying kilns, rotary kilns of cement plants, and also gears in construction machinery and mining mechanisms, are all operated under extremely high loads. Due to these forces, the gears are exposed to great stress. To ensure flawless operation even in such conditions, it is necessary to use suitable lubricants.

More info here

Gear-RackLub lubricant

Creating a strong and dry lubricating layer on metal surfaces Resistant to extreme temperatures (-90 to 550 °C) and pressures Significantly reducing wear Preventing freezing

Gear-RackLub lubricant

Brakes

The brakes are the most important part of the mechanism for the safety. That is why they shall be cared for especially carefully. This is the only way ensuring the maximum reliability of the mechanism. 

More info here

BSS® brake service spray

Preventing the brake shoes or pads from jamming Preventing uneven brake wear Prolonging the lifetime of the brake shoes and pads Preventing the brake shoes from blocking Removing brake squeaking Increasing…

BSS® brake service spray

BSS® cyklo brake service spray

Preventing brake squeaking without affecting braking performance Removing heat Preventing uneven brake wear Eliminating vibration at braking Increasing braking safety Penetrating quickly into microscopic pores,…

BSS® cyklo brake service spray

CeramLub ceramic paste

Temperature resistance from -20 to 1,600 °C Resistant to salt water, acids and alkalis Repelling water, protecting against corrosion, not getting rubbery Resistant to vibration corrosion Preventing jamming and pasting …

CeramLub ceramic paste

Trolley wires

Ice crust on trolley wires may be a problem during winter months - for most transport companies, it means higher expenses subsequently.
The prevention of ice crust formation on trolley wires lies in treating them with a biologically degradable chemical agent applied from the equipment located right on the vehicle. The control system is able to detect the position of the trolley wire while the vehicle is moving and then activate the nozzle using a solenoid valve. Thus, loss of the liquid used is minimised and efficiency increased.

More info here

Pantotec DK® lubricant

Not clogging trolley wires High adhesion Readily biodegradable Application temperature to -30 °C

Pantotec DK® lubricant

Cranes

Lubricating cranes is very similar to lubricating the rolling stock. The aim is to reduce wear and excessive noise. We offer lubricants and suitable methods of their application for this purpose, too.

More info here

RailLub® 90/CR lubricant

Specially developed lubricant with a high content of solid particles Revolutionary composition preventing individual components from separating Reducing friction and wear despite high specific pressures

RailLub® 90/CR lubricant

Other

Every application has its solution. If you are having doubts about our offer, contact our company sales department which will help you to find the appropriate type of lubricant.

More info here

HT PU 680 lubricant

Pressure absorption - resistance to high pressure <350 bar Water-resistant Strong adhesive ability Good protection against corrosion High oxidation stability Resistant to ageing Good sealing effect Resistant to…

HT PU 680 lubricant

SyntLub® K lubricant

Suitable for chains and steel cables, moving parts, joints, bolts, etc. For high vibrations and impact loading Forming a transparent protective film Effective at temperatures from -45 to 160 °C

SyntLub® K lubricant

  • Looking back on a long and very appreciated partnership, we engaged Sklenář s.r.o. for an installation of a special lubrication system for the top of rails. The manufactured parts by Sklenář s.r.o. were made of high quality and the installation work was perfect. Another good cooperation with Sklenář s.r.o.

    Günter Herzig, Managing Director IGRALUB AUSTRIA GmbH
  • "Great job, as always.“

    Michael Smilansky FUJI ROBOTICS, USA
  • "The supply of the palletising robot satisfied our expectations. Sklenář, s. r. o., was evaluated as one of our best suppliers with an exemplary approach to solving
    our problems."

    František Peringer, Gypstrend, s.r.o.
  • "Sklenář, s. r. o., was a good choice. Although our
    requirements were rather specific, we were always satisfied
    with the result."

    Ing. Dalibor Krejsa, JSP International, s.r.o.
  • In 2015, we started a trial operation of a system of the additional lubrication of tram wheel flanges and the rail heads, supplied by Sklenář s.r.o. The HeadLub 90 friction modifier used meets the required parameters, and its applications significantly eliminate undesirable sound pressure and reduce the wear.

    an Šurovský, Ph.D., Dopravní podnik hl. m. Prahy (04/2016)
  • "We have been co-operating with Sklenář s. r. o., for more than 10 years, appreciating prompt service, professional handling, high quality and performance.“

    Rainer Nothhelfer SGH Schüttguthandling, Germany

Are you interested in our services? Contact us for more information.

Non-binding inquiry